Overview
The Multi-Field Condition check is a new Processr Job that can be used to identify if a lead has a duplicate value across specified fields from a list of set values.
For example, if a user is capturing data in 3 fields:
- asset_1
- asset_2
- asset_3
For each of these fields, there is a list of values that can be populated in each:
- GDPR
- CCPA
- The World of Compliance
- Your Data, Your Security
This processor job will prevent the values from the list above from being repeated more than once across each of the 3 fields.
Configuration
1. Within your campaign, navigate to the Processr tab and select Add Job.
2. Select the Multi Field Condition Check from the dropdown.
3. Once selected, the configuration will open.
a. Enter the fields that will be referenced in this check within the Field section
b. Under Values, enter your list of values that would be accepted across the fields
c. The case_sensitive option allows you to specify if the values need to be case-sensitive or not
Example Scenario
- All asset fields are mandatory
- Duplicate values cannot be used
- All values must be formatted as the list provided
Here’s how you’d configure the Multi Field Condition Job:
1. Add or Configure the Job
2. Add Conditions
| Condition 1: Fields | Condition 2: Validate the Values |
| Field Name: Select asset_1, asset_2 and asset_3 from the dropdown. | Values enter GDPR, CCPA, The World of Compliance, Your Data, Your Security |
|
Condition 1: Fields |
|
Condition 2: Validate the Values |
How It Works
| Pass | Fail |
|
asset_1 = GDPR |
asset_1 = Your Data, Your Security |